|
31 maig 2023 |
Experimental testing and numerical simulation of bearing and filled hole tension carbon specimens under dynamic loading |
Guerrero GarcÃa, José Manuel
|
|
31 maig 2023 |
Failure analysis of hybrid glass/carbon thin ply laminates subjected to tensile loading |
Snepsts, Alens
|
|
31 maig 2023 |
Fatigue cohesive zone modelling of a benchmark test for composites under complex loading sequences resulting in non-self-similar damage evolution |
Leciñana Arregui, Iñaki
|
|
31 maig 2023 |
Fatigue failure prediction in GFRP composite laminates: comprehensive fatigue damage model, software implementation in SAMCEF and benchmark tests |
Carreras, Laura
|
|
|
Finite-thickness cohesive elements for modeling thick adhesives |
Sarrado Molina, Carlos
; Leone, Frank A.
; Turon Travesa, Albert
|
|
desembre 2016 |
Finite-thickness cohesive elements for modeling thick adhesives |
Sarrado Molina, Carlos
; Leone, Frank A.
; Turon Travesa, Albert
|
|
31 maig 2023 |
Full Field Data Fusion (FFDF) to characterise subsurface defects in composite structures |
Dulieu-Barton, Janice M.
|
|
31 maig 2023 |
Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements |
Willmann, Erik
|
|
31 maig 2023 |
Hybridisation of carbon and natural fibers for sustainable composites in automotive applications |
Corvo Alguacil, Marina
|
|
13 novembre 2015 |
Hygrothermal effects on CFRP: testing, analysis and structural optimization |
MarÃn Hernández, Lorena
|
|
|
Hygrothermal effects on CFRP: testing, analysis and structural optimization |
MarÃn Hernández, Lorena
|
|
|
Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms |
MarÃn Hernández, Lorena
; González Juan, Emilio Vicente
; Maimà Vert, Pere
; Trias Mansilla, Daniel
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
|
|
18 gener 2016 |
Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms |
MarÃn Hernández, Lorena
; González Juan, Emilio Vicente
; Maimà Vert, Pere
; Trias Mansilla, Daniel
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
|
|
31 maig 2023 |
Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation |
Chandarana, Neha
|
|
31 maig 2023 |
Implementation of 3d nonlinear material model in finite element code |
Pupure, Liva
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
ParÃs Carballo, Federico
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
ParÃs, Federico
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Mollenhauer, David
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Hoos, Kevin H.
; Zhou, Eric
; Iarve, Endel V.
; Popelar, Carl
; Riha, David
; Mollenhauer, David H.
|
|
|
Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs |
Budhe, Sandip Rudha
; RodrÃguez Bellido, Ana Teresa
; Renart Canalias, Jordi
; Mayugo Majó, Joan Andreu
; Costa i Balanzat, Josep
|
|
març 2014 |
Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs |
Budhe, Sandip Rudha
; RodrÃguez Bellido, Ana Teresa
; Renart Canalias, Jordi
; Mayugo Majó, Joan Andreu
; Costa i Balanzat, Josep
|
|
31 maig 2023 |
Influence of voids on thick DCB joint behavior |
Fan, Jialiang
|
|
juliol 2024 |
Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses |
Garulli, Torquato
; Arteiro, Albertino
; Blanco Villaverde, Norbert
; Renart Canalias, Jordi
|
|
31 maig 2023 |
Investigating shear performance of PMCS |
Flores, Mark
|
|
31 maig 2023 |
Investigation of failure mechanisms in L-angle composite laminates |
Bushpalli, Sindhu
|